|
Adjusting the brake
If you would like to talk with someone
about your Pukka Electric Minibike,
please contact our service center toll-free
at 1-877-855-2832.
Your Pukka comes equipped with a 90mm
rear band brake. When adjusted properly,
the brake will allow you to stop your
Pukka safely. Your Pukka's brake can
be adjusted by turning the barrel screws
at each end of the brake cable, by adjusting
the brake cable, and by adjusting the
position of the band within the brake
housing.
The most common adjustment to the
brake is to make the brake tighter
or looser. This can be easily done
by adjusting a barrel screws at either
end of the brake cable. You may need
to adjust both end to get the desired
adjustment.
1. At the brake end of the cable,
the barrel screw is threaded into
the brake. Turning the screw counter-clockwise
will tighten the brake and clockwise
will loosen it. Lock the screw into
place with the lock nut.
2. At the brake lever end of the
cable, the barrel screw is threaded
into the brake lever assembly. Turning
the screw counter-clockwise will tighten
the brake and clockwise will loosen
it. Lock the screw into place with
the lock nut.
3. If the band is tightening unevenly
around the brake drum, you can change
the position of the band by adjusting
the positioning bolts located on the
the metal brake housing. Each positioning
bolt has a lock nut to secure it in
place.
 |
|
|
